Todayfurnitureproduction, finishing and decorative works are not practically possible without using of laminated particle boards (LPB). Laminated particle board differs from sanded particle board by special film on surface of board which provides material with unique properties.
Qualitative characteristics of basis of boardsare refilled with very important parameters during operation:
• additional strength;
• high impact resistance;
• resistance to chemicals;
• hygienic and decoration.
Now you can buy a sheet of laminated particle board with different textures. These are popular color schemes simulated as natural wood so other materials. Decorsare renewedconstantly, and you can buy laminated particle boards selecting min. from hundred decors.
Coating of particle boards surface is made with decorative film by pressing under high temperature and pressure. The whole process takes place in strict compliance with established standards.
Using of high quality raw materials stipulates high environmental and operational properties of productwhich meet all applicable international standards.
Wholesale of laminated particle boardsstipulate thorough packing of material to avoid its damage. Products are sorted into packages with the same symbol. They are packagedwith covering sheets and tied with packaging tape. The company guarantees safety of the goods and the absence of mechanical damages.
Procedure for further warehousing, storage and transport of boards is very important. It is better to order laminated particle boards in advance to decide the optimal transportation route, choice of transport (road, rail, etc.), packaging methods. Products will be protected from possible adverse impacts and delivered right on time.
Parameter (according to STB 1348-2009)
|Modulus in rupture in bending||MPa||14,0||13,0||
|Tensile strength perpendicular to surface of board||
|Specific resistance to the normal separation of top layer||
|Formaldehyde emission||mg/100 g||≤ 8,0 (emission class E1)||GOST 27678|
|Group according to the physical and mechanical properties||А|
1 и 2
|Coating surface||smooth or bold|
|Gloss degree||glossy or dull|
|Max. deviation on thickness||+/- 0,50 mm|
|Max. deviation on length and width||+/- 5,0 mm|
|Modulus of rupture in bending||14,0-8,5 MPa (depending on boards thickness)|
|Tensile strength perpendicular to surface of board||0,4-0,2 MPa(depending on boards thickness)|
Specific resistance to the normal separation of top layer
||min. 0,8 MPa|
|Bow||up to 1,2 mm|
|Formaldehyde emission||≤ 8,0 mg/ 100 g (emission class E1)|
|Moisture resistance||5-13 %|
|Spotting resistance||without changes of coating appearance|
|Contact heat resistance under the influence warm and wet factors||
without changes of coating appearance apart from scarcely noticeable aclipse and colour of coating
|Size and thickness, mm||Quantity of boards in pallet||
Weight of pallets, brutto (kg)
||Quantity of pallet / boards in truck||
72 + 1*
|2750×1830×10||58 + 1*||2000||10/580||29,189|
|2750×1830×15||40 + 1*||2000||10/400||30.195|
|2750×1830×16||36 + 1*||2000||10/360||28,987|
|2750×1830×18||32 + 1*||2000||10/320||28,987|
|2750×1830×22||27 + 1*||2000||10/270||29,893|
|2750×1830×25||24 + 1*||2000||10/240||30,195|
|2750×1830×28||21 + 1*||2000||10/210||29,519|
||19 + 1*||2000||10/190||30,598|
|2750×1830×38||16 + 1*||2000||10/160||30,598|
|2800×2070×8||65 + 1*||2000||10/650||30.139|
||52 + 1*||2000||10/520||30.139|
||43 + 1*||2000||10/430||29.907|
|2800×2070×15||35 + 1*||2000||10/350||30.429|
|2800×2070×16||30 + 1*||1900||11/330||30.603|
|2800×2070×18||26 + 1*||1900||11/286||29.838|
|2800×2070×22||22 + 1*||2000||10/220||28.052|
|2800×2070×25||20 + 1*||2000||10/200||28.980|
|2800×2070×28||18 + 1*||2000||10/180||29.212|
|2800×2070×32||16 + 1*||2000||10/160||29.676|
|2800×2070×38||14 + 1*||2000||10/140||30.834|